Device Type:
Switch - 24 ports - L3 - managed - stackable
Enclosure Type:
Rack-mountable 1U
Subtype:
Gigabit Ethernet
Ports:
24 x 10/100/1000 (PoE+) + 2 x 10 Gigabit SFP+ (uplink) + 2 x combo 10GBase-T (uplink)
Power Over Ethernet (PoE):
PoE+
Performance:
Switching capacity (64-byte packet size): 95.23 Mpps Switching capacity: 128 Gbps
Capacity:
MSTP instances: 16 Simultaneous VLANs: 4094 IPv4 routes: 7000 IP router interfaces: up to 256 Virtual routers: up to 255 ACL entries: up to 3000 QoS hardware queues: 8
MAC Address Table Size:
16K entries
Jumbo Frame Support:
9216 bytes
Routing Protocol:
RIP-2, IGMPv2, IGMP, IGMPv3, policy-based routing (PBR), MLDv2, MLD, VRRPv2, VRRPv3, CIDR
Remote Management Protocol:
SNMP 1, SNMP, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI, SCP
Encryption Algorithm:
MD5, SSL
Authentication Method:
Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Features:
Flow control, DHCP support, BOOTP support, ARP support, IGMP snooping, Syslog support, DoS attack prevention, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, High Availability, Multicast Storm Control, Unicast Storm Control, firmware upgradable, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, Dynamic ARP Insp
Compliant Standards:
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3an, IEEE 802.3at, IEEE 802.3az
Processor:
X ARM: 800 MHz
Status Indicators:
Port transmission speed, system, RPS (Redundant Power Supply), link/activity, master
Interfaces:
24 x 1000Base-T RJ-45 PoE+ 4 x 10GBase-X SFP+ uplink 2 x 10GBase-T RJ-45 uplink 1 x console RJ-45 1 x USB Type A
Power Device:
Internal power supply
Power Redundancy Scheme:
4+1
Voltage Required:
AC 120/230 V (50/60 Hz)
Power Consumption Operational:
870.1 Watt
Cables Included:
1 x serial cable
Rack Mounting Kit:
Included
Compliant Standards:
UL 60950, FCC Part 15 A, CSA 22.2, FCC CFR47 Part 15 A, USGv6
Localization:
North America
Service & Support:
Limited warranty - replacement - lifetime - response time: next business day Technical support - phone consulting - 1 year Technical support - web support - 1 year
Min Operating Temperature:
32 F
Max Operating Temperature:
122 F
Humidity Range Operating:
10 - 90% (non-condensing)
Min Storage Temperature:
-4 F
Max Storage Temperature:
158 F
Humidity Range Storage:
10 - 90% (non-condensing)