Image(s) and product specifications may not represent actual product and are subject to change.
With Tripp Lites HDMI Over Cat5/Cat6 Wallplate Extender Kit, you can locate a HDMI enabled display up to 230 ft. away from the HDMI source, using readily available Cat5 or Cat6 UTP cable (for best performance, use Solid wire Cat6). The kit consists of a Passive wallplate at the source side, and an Active wallplate (with built-in signal regenerator) at the display side. Simply run two Cat5/6 UTP cables between the two wallplates, and plug in standard Tripp Lite HDMI patch cables to the HDMI source and the display. The Green LED on the Display wallplate lets you know that power and a signal are coming from a connected source. The Red LED indicates only a signal is being received. The kit is functioning properly when the unit is connected to a display and the Green LED is lit.
|Best selling faceplates & mounting boxes ranking|
|1||C2G 1 Socket Keystone Jack Surface Mounting Box 03831||$3.96|
|2||C2G 4 Socket Keystone Network/Multimedia Faceplate 03413||$3.31|
|3||C2G HDMI Pass Through Decora Style Wall Plate 39710||$32.48|
|4||C2G 2 Socket Keystone Jack Surface Mounting Box 03833||$4.32|
|5||C2G Snap-In Blank Keystone Insert 03820||$1.64|
The data and images on this website have been subjected to numerous control mechanisms to ensure its' accuracy. FrontierPC.com will use best efforts to maintain its accuracy. However, if at any time the data or images provided are incorrectly priced or below fair market value or availability has substantially changed or image or descriptions contain inaccuracies, FrontierPC.com shall not be held responsible or liable, furthermore FrontierPC.com reserves the right to reject any orders placed based on this erroneous information. Copyright 2001-2019 FrontierPC.com Computer Inc., Frontier PC Canada, Frontier Computer, Toronto, Vancouver, Calgary, Halifax. All Rights Reserved.