Cart
General
Device Type:
VoIP phone adapter
Height (Rack Units):
1U
Width:
17.5 in
Depth:
13.5 in
Height:
1.7 in
Weight:
15.23 lbs
Processor / Memory / Storage
RAM:
1 GB SDRAM
Flash Memory:
256 MB
Networking
Form Factor:
Rack-mountable
Connectivity Technology:
Wired
Data Link Protocol:
Ethernet, Fast Ethernet, Gigabit Ethernet
Network / Transport Protocol:
DHCP, DNS
Routing Protocol:
HSRP
Remote Management Protocol:
Telnet, SNMP 3, HTTP, TFTP, CLI
Features:
Wall mountable
Authentication Method:
RADIUS, TACACS+
Compliant Standards:
IEEE 802.3, ANSI T1.101, ITU-T G.823, ITU-T G.824
IP Telephony
VoIP Protocols:
MGCP, SCCP, SIP, H.323 v4, RTP, SRTP
Voice Codecs:
G.711, G.729a, T.38
Telephony Interfaces:
24 phone (FXS)
IP Telephony Features:
Caller ID, call waiting, automatic fax/modem detection and pass-through, call hold, call transfer
Communications
Analog Ports Qty:
24
Supported Flash Memory Cards:
CompactFlash Card
Expansion / Connectivity
Expansion Slots:
1 (total) / 1 (free) x EHWIC 1 (total) / 0 (free) x PVDM
Interfaces:
2 x 1000Base-T - RJ-45 1 x auxiliary - RJ-45 1 x console - RJ-45 1 x mini-USB 1 x USB 2.0 - Type A 24 x FXS - RJ-21
Miscellaneous
Included Accessories:
64-channel voice DSP module
Compliant Standards:
CISPR 22 Class A, CISPR 24, EN55024, EN55022 Class A, EN50082-1, AS/NZS 60950-1, ICES-003 Class A, CS-03, R&TTE, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, AS/NZS 3548 Class A, VCCI V-3, EN 61000, TIA/EIA/IS-968, CNS 13438, EN 300 386, CAN/CSA-C22.2 No. 60950-1
Power
Power Device:
Internal power supply
Voltage Required:
AC 120/230 V (50/60 Hz)
Power Consumption Operational:
135 Watt
Software / System Requirements
Software Included:
Cisco IOS IP Base, Cisco IOS Unified Communications
Manufacturer Warranty
Service & Support:
Limited warranty - advance hardware replacement - 90 days - response time: 10 days
Environmental Parameters
Min Operating Temperature:
32 F
Max Operating Temperature:
104 F
Humidity Range Operating:
10 - 85%
