Device Type:
Switch - 48 ports - L3 - managed - stackable
Enclosure Type:
Desktop, rack-mountable 1U
Subtype:
Gigabit Ethernet
Ports:
36 x 10/100/1000 (UPOE) + 12 x 100/1000/2.5G/5G/10G (UPOE) + 8 x 10 Gigabit SFP+ (uplink)
Power Over Ethernet (PoE):
UPOE
Performance:
Switching capacity: 472 Gbps Forwarding performance: 351.19 Mpps Stacking bandwidth: 160 Gbps
Capacity:
IPv4 routes: 24000 NetFlow entries: 24000 Virtual interfaces (VLANs): 4094 Switched virtual interfaces (SVIs): 1000
MAC Address Table Size:
32000 entries
Jumbo Frame Support:
9198 bytes
Routing Protocol:
RIP-1, RIP-2, static IP routing, RIPng
Authentication Method:
Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Features:
Full duplex capability, layer 2 switching, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dyna
Compliant Standards:
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at
Status Indicators:
Port transmission speed, port duplex mode, system, active, status, PoE
Interfaces:
36 x 1000Base-T RJ-45 UPOE - 60 W 1 x USB Type A 1 x serial (console) RJ-45 management 1 x management (Gigabit LAN) RJ-45 management 1 x management (mini-USB) Type B management 12 x 100/1000/2.5G/5G/10GBase-T RJ-45 UPOE - 60 W 8 x 10GBase-X SFP+
Expansion Slots:
1 (total) / 1 (free) x Stacking Module slot
Power Device:
Internal power supply - hot-plug
Installed Qty:
1 (installed) / 2 (max)
Power Redundancy:
Optional
Power Redundancy Scheme:
1+1 (with optional power supply)
Power Provided:
1100 Watt
Voltage Required:
AC 120/230 V (50 - 60 Hz)
Rack Mounting Kit:
Included
Compliant Standards:
CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, ICES-003 Class A, RoHS, UL 60950-1 Second Edition, KCC, FCC Part 15 A, ISO 7779, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, EN 55022 Class A
Software / System Requirements
Software Included:
Cisco IOS IP Base
Service & Support:
Limited warranty - replacement - lifetime - response time: next business day Technical support - phone consulting - 90 days
Min Operating Temperature:
23 F
Max Operating Temperature:
113 F
Humidity Range Operating:
5 - 96% (non-condensing)
Min Storage Temperature:
-40 F
Max Storage Temperature:
158 F