Device Type:
Wireless router - 4-port switch (integrated)
Connectivity Technology:
Wireless, wired
Data Link Protocol:
Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n
Frequency Band:
2.4 GHz / 5 GHz
Capacity:
Connection / user qty: 20
Network / Transport Protocol:
L2TP, IPSec, DHCP, L2TPv3, DDNS
Routing Protocol:
OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE, policy-based routing (PBR), WCCP, Bidirectional Forwarding Detection (BFD)
Remote Management Protocol:
Telnet, SNMP 3, HTTP, SSH, CLI
Encryption Algorithm:
DES, Triple DES, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Authentication Method:
RADIUS, TACACS+
Features:
Firewall protection, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, content filtering, DiffServ support, MAC address filtering, IPv6 support, Intrusion Prevention System (IPS), firmware upgradable, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Dynamic Multipoint VPN (DMVPN), RADIUS support, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, CleanAir technology, DHCP relay, DH
Compliant Standards:
IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, IEEE 802.11ac
RAM:
1 GB (installed) / 1 GB (max)
Flash Memory:
1 GB (installed) / 1 GB (max)
Status Indicators:
System, active, wireless
Interfaces:
WAN: 1 x 10Base-T/100Base-TX/1000Base-T - RJ-45 LAN: 4 x 10Base-T/100Base-TX - RJ-45 Management: 1 x RJ-45 USB: 1 x mini-USB Type A
Antenna:
External detachable
Power Device:
External power adapter
Voltage Required:
AC 120/230 V (50/60 Hz)
Power Consumption Operational:
20 Watt
Software / System Requirements
OS Provided:
Cisco IOS Advanced IP services
Service & Support:
Limited warranty - 1 year
Min Operating Temperature:
-13 F
Max Operating Temperature:
140 F