Cart
General
Device Type:
VoIP phone adapter
Width:
3.9 in
Depth:
1.1 in
Height:
3.9 in
Weight:
4.66 oz
Networking
Form Factor:
Wall mountable
Connectivity Technology:
Wired
Data Link Protocol:
Ethernet, Fast Ethernet
Network / Transport Protocol:
ARP, DHCP, RTP, RTCP
Remote Management Protocol:
HTTP, HTTPS, TFTP, SSH
Status Indicators:
Power, phone
Features:
Syslog support, DiffServ support, IPv6 support, full duplex mode, SNTP support, Quality of Service (QoS), reset button, LLDP support, DHCP client, Type of Service (ToS), Internet Control Message Protocol (ICMP), dual image support, AES encryption, Cisco Discovery Protocol, secure boot, VLAN Tagging
Encryption Algorithm:
AES
Compliant Standards:
IEEE 802.1Q, IEEE 802.1p, IEEE 802.1ab (LLDP)
IP Telephony
VoIP Protocols:
SIP, RTCP, RTP, SRTP
Voice Codecs:
G.711, G.729a, G.729ab, G.711u, G.711a, T.38
Telephony Interfaces:
2 phone (FXS)
IP Telephony Features:
Echo cancellation, comfort noise generation (CNG), voice activity detection (VAD), call forwarding, caller ID, adaptative jitter buffer, call waiting, call hold, call transfer, silence suppression
Expansion / Connectivity
Interfaces:
1 x 100Base-TX - RJ-45 2 x FXS - RJ-11
Miscellaneous
MTBF:
300,000 hours
Compliant Standards:
FCC Part 15 B, EN 61000-4-2:2009, EN 61000-4-11:2004, EN 61000-3-3:2013, EN 61000-4-3:2006+A1:2008+A2:2010, EN 61000-4-8:2010, EN 61000-4-5:2014, EN 55024:2010+A1:2015, Directive 2014/35/EU, Directive 2014/30/EU, EN 61000-4.4:2012, UL 60950 Second Edition, CAN/CSA C22.2 No. 60950 Second Edition, ANSI C63.4-2014, AS/NZS 60950-1:2015, EN 61000-3-2:2014 Class A, EN 55032:2015 Class B, AS/NZS CISPR32:2015 Class B, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013
Power
Power Device:
External power adapter
Voltage Required:
AC 120/230 V / DC 5 V
Power Consumption Operational:
5 Watt
Manufacturer Warranty
Service & Support:
Limited warranty - 1 year
Environmental Parameters
Min Operating Temperature:
32 F
Max Operating Temperature:
104 F
Humidity Range Operating:
10 - 90% (non-condensing)
