Device Type:
Switch - 48 ports - L3 - managed - stackable
Enclosure Type:
Desktop, rack-mountable 1U
Subtype:
Gigabit Ethernet
Ports:
48 x 10/100/1000 (PoE+) + 4 x Gigabit SFP
Power Over Ethernet (PoE):
PoE+
Performance:
Switching capacity: 216 Gbps Forwarding performance: 107.1 Mpps
Capacity:
Virtual interfaces (VLANs): 1023
Jumbo Frame Support:
9216 bytes
Routing Protocol:
OSPF, RIP-1, RIP-2, HSRP, VRRP, PIM-SM, PIM-DM, PIM-SSM, policy-based routing (PBR), RIPng
Remote Management Protocol:
SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI
Authentication Method:
Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Features:
Layer 2 switching, power over Ethernet (PoE), auto-negotiation, ARP support, Cisco Fast EtherChannel, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Intrusion Detection System (IDS), Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, SSH
Compliant Standards:
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX
Status Indicators:
Port status, port transmission speed, port duplex mode, system, RPS (Redundant Power Supply), PoE, link/activity
Interfaces:
48 x 1000Base-T 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 24 ports (PoE+) / 48 ports (PoE) - 30 W 1 x console SFP (mini-GBIC) - RJ-45 1 x mini-USB Type B management 2 x USB Type A 1 x 1000Base-TX RJ-45 management 4 x SFP uplink
Expansion Slots:
1 (total) / 1 (free) x Stacking Module slot
Power Device:
Internal power supply
Installed Qty:
1 (installed) / 2 (max)
Power Redundancy:
Optional
Power Redundancy Scheme:
1+1 (with optional power supply)
Power Provided:
1025 Watt
Voltage Required:
AC 120/230 V (50/60 Hz)
Features:
Redundant Power System (RPS) connector
Compliant Standards:
CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2011/65/EU, VCCI Class A, KN24, KN22 Class A, EN 300386
Software / System Requirements
Software Included:
Cisco IOS IP Lite
Service & Support:
Limited warranty - advance parts replacement - lifetime - response time: next business day Technical support - consulting - 90 days
Min Operating Temperature:
23 F
Max Operating Temperature:
113 F
Humidity Range Operating:
10 - 95% (non-condensing)
Min Storage Temperature:
-13 F
Max Storage Temperature:
158 F
Humidity Range Storage:
10 - 95% (non-condensing)