Camera Enclosure Camera Enclosures

The SHB-4200 is a box camera housing. This accessory comes with the wall mount bracket and is IP66. This housing does not have a heater or blower. This housing is made of aluminum and is available in ivory.

The smooth curves of the low-profile ACE20C Indoor Surface Mount Wedge Housing makes it a very attractive surface mount unit. Made of high-impact polycarbonate; it offers sturdiness. Molded-in hinges allows for total access to the camera from below. Hence installation is a snap and servicing simple. Tamper-resistant fasteners are included to protect the camera equipment from vandals. The....

The UHO series housings are smartly styled housings, for outdoor use. These housings are both cost-competitive and installer-friendly. Models are available for use with 24 VAC, 115 VAC, and 230 VAC cameras, to fit a wide range of applications.

The SM5 series of vandal-resistant, surface mount enclosures provide superior camera protection in a compact size. Constructed out of rugged high-impact polycarbonate, the SM5 has been designed to withstand several degrees of volatile attacks and varying harsh weather conditions.

The KTE-300/200/100 are rugged, weatherproof housings for medium and small cameras. Made of high-impact ABS plastic, these camera housings are strong, durable, and lightweight. ABS plastic is also an effective insulator of electricity.

The IP Network Ready FDW75CF2N 7" Fusion Dome offers versatility and camera protection in a compact size. It accepts analog camera systems from Canon & Elmo and many network cameras from Axis, Canon, Elmo, JVC, Panasonic and Sony or a single fixed camera with a maximum camera length of 7.5".

The IP Network Ready 7" FusionDome model offers versatility and camera protection in a compact size. It accepts analog camera systems from Canon & Elmo and many network cameras from Axis, Canon, Elmo, JVC, Panasonic and Sony or a single fixed camera with a maximum camera length of 7.5".

The EH3512 Camera Enclosure with EM1450 Wall mount constructed from die cast and extruded aluminum. This enclosure is for use with cameras having fixed focal length lenses or motorized zoom lenses (with or without auto iris operation). The front hinged lid provides easy access to the removable camera sled. Two adjustable (PG13.5) glands on the bottom of the enclosure allow for easy....

The RHW75C12N IP Network Ready 7" Vandal-resistant Rugged Dome model offers versatility and camera protection in a compact size. It accepts analog camera systems from Canon & Elmo and many network cameras from Axis, Canon, Elmo, JVC, Panasonic and Sony or a single fixed camera with a maximum camera length of 7.5".

Moog-Videolarm's POE Ready line is a highly sophisticated, yet very cost effective, series of housings that feature simple, quick installation. One POE Plus (IEEE802.3at) powered cable is all that is needed to intelligently distribute power between the H&B and camera. The technology prioritizes the incoming power so that camera operation is guaranteed across the full range of the cameras....

The premier indoor heavy-duty housing is constructed from 14-gauge steel. Seams is welded and mounting hardware is fully contained inside to prevent intrusion on the camera. In addition, a high-security barrel lock safeguards the single access point. The AMS90CT is for corners. The steel construction provides maximum protection to a solid-state camera and lens combination up to 8".

The IP Network Ready 7" FusionDome model offers versatility and camera protection in a compact size. It accepts analog camera systems from Canon & Elmo and many network cameras from Axis, Canon, Elmo, JVC, Panasonic and Sony or a single fixed camera with a maximum camera length of 7.5". On outdoor models a heater and blower are standard, and a cold weather kit is available to offer even....

The SDP12THB Super Dome is a general purpose outdoor dome camera housing. This low cost unit comes standard a pendant mount with 1 1/2" pipe thread. Its MCL is 7", capable of accommodating 2 full body fixed camera with lens. The heater/blower for this unit also includes a thermostat.

AXIS T93E05 features IP66 protection rating against the ingress of dust and high pressure water jets from any direction. The materials used in the enclosure, in combination with the camera, make the use of a window heater unnecessary.

The Axis ACH13HB Outdoor Housing provides protection for Axis network cameras in both hot and cold climates. The housing was designed to meet IP65 standard of protection.

The SuperDome is a general purpose dome camera housings that is very versatile. This low-cost unit comes standard with a factory installed wall mount. Its MCL is 7", capable of accommodating 2 full body fixed cameras with lenses.

AXIS T92A20 Housing is tailor-made and carefully tested to comply with Axis network cameras. This stylishly designed housing has a side opening and pre-installed High Power over Ethernet splitter for quick and easy installation. The pre-installed High Power over Ethernet splitter provides power both for the camera and for heating the housing, eliminating the need for additional power....

The Axis Pendant Dome protects Axis network cameras in outdoor environments as well as indoor conditions that may be humid, cold or dusty.

The housing provides IP66-class protection from dust and water ingress. With fan-assisted heating, the housing enables the camera to operate in temperatures down to -4°F (-20°C).

The dome ships with an optically clear polycarbonate lower....

The IP Network Ready 7" Vandal-resistant Rugged Dome model offers versatility and camera protection in a compact size. It accepts analog camera systems from Canon & Elmo and many network cameras from Axis, Canon, Elmo, JVC, Panasonic and Sony or a single fixed camera with a maximum camera length of 7.5". On outdoor models a heater and blower are standard, and a cold weather kit is....

The Axis ACH13 Outdoor Housing provides protection for Axis network cameras in both hot and cold climates. The housing was designed to meet IP65 standard of protection.

Axis Indoor Vandal Resistant Housing provide maximum protection for fixed Axis Network Cameras. Housing is constructed with a 14-gauge steel and off-white powder coat finish.

The housing ships with a clear Lexan viewing window for increased protection against vandalism. An easy-to-replace Window Guard paint shield allows vandalized windows to be quickly and economically restored to....

D-Link's DCS-71 outdoor dome housing series provide cost-effective protection and versatile connectivity options for D-Link motorized pan and tilt surveillance cameras in outdoor environments. The DCS-71P model facilitates Power over Ethernet (PoE) while the DCS-71W provides wireless connection for the security camera, providing extra convenience in connecting and wiring surveillance cameras.....

AXIS T92A10 Housing is tailor-made and carefully tested to comply with Axis network cameras. This stylishly designed housing has a side opening and a preinstalled power supply for easy and time saving installation.